flexing tester(High level )

Model: HD-8869C
Place of Origin: Zhejiang,China (Mainland)
Usage: Tensile Testing Machine

inquiry

basketAdd to Basket  Edit

Share |

Product Description

Payment & Shipping Terms Supply Capacity
Trade Term:FOB,CFR,CIFProduction Capacity:1000 SETS PER YEAR
Payment Terms:L/C, D/P, T/TPacking:WOODEN BOX
Min. Order:1 Set/SetsDelivery Date:25 DAYS
Means of Transport:Ocean, Air

This machine requires design and production, in strict accordance with the standards of UL817, GB2099.1-2008, IEC60884.1,cluse23.4, IEC60320,Cluse22.4. VDE0620 etc. This machine is special equipment of the detection of AC, DC power cord and plug to the pinout of the flexing of fatigue strength.


* can connect one load machine to provide large voltage, and large current load.
* test the bending performance of the plug cord, the machine have lower voltage large current performance, signal check, and strike arc performance.
* E, L, N three wire can be test independently.
* test with large voltage and large current, equipped 5 units alone sway fixture, strike arc test performance.
* 5 units independent counter and alarm, only test continuity, can't test voltage drop. after stilke arc, the sway time can be set according to requirement.
* each working station use stepper motor to drive separately, one line open, then this line stop count and alarm, and shut off the load line. and keep the testing times, the station stop work, others still work until line open or all sample tested ok, then whole machine stop.
* the testing station will short connect L-wire and N-wire, another end connect to machine. as loon as one of L and N broken, then the machine judge failure.                                                                                  *comply with the standards of UL817, GB2099.1-2008, IEC60884.1,cluse23.4, IEC60320,Cluse22.4. VDE0620 etc.

1. Clamp:5 sets, central position can be adjustable.(comply with standard's requirement)
2. power supply:AC220V±10% ,2 KW(can be customized according to client's requirement)
3. exterior voltage :AC50-300V adjustable, voltage accuracy: ±1%
4. exterior current:0-20A adjustable, current accuracy: ±2%
5. lower voltage large current output:0~20A adjustable.
6. power-on wire number:each station test 3 pieces wire specimen, E-wire can't test large current.
7. test station number:5 units(working independently)
8. angle of bend : 0°~±180°adjustable
9. speed: 5~60times/M adjustable
10. load: connect with load bank, 5 station series connection.
11.weight: 10N / 20N (equiped according to client's requirement or standard's requirement(your mentioned two standards weight requirement is 10N & 20N)).
12. size: 1450×700×1450mm
13. test times range: 999999 times(can be preset)
14. times error: ±1time
15. failure alarm: once sample wire broken, buzzer alarm, screen displays indication
16. eligible indicate:once sample bending to the setting times, sample ok, screen dispaly indication.

Category: Power Plug Integrated Tester

Related Category: Automatic cable tie twisting machine  Full automatic crimping machine  Full Automatic 16A Plug Inserts Crimping machine  Copper recycling production line  Injection mould machine